product page:
WOOD DRYER
- No deformation or cracking
- Natural drying process.
- Eliminates fungi and molds
- Short drying time
- Low drying costs.
168 hours
Oak drying time, board 50mm thick
input humidity 45% output humidity 12%
120 hours
Pine drying time, board 50mm thick
input humidity 44% output humidity 10%
What distinguishes the product
Key features of the product
Ecological
Zero CO2 emissions during operation. ONLY POWERED BY ELECTRICITY
Economic
High efficiency of drying processes also in terms of energy consumption of about 9 kW per 1 tonne% of dried biological materials. 9 kW is the total consumption per 1 tonne % of all dryer equipment.
MICROBIOLOGY
High rates of removal of fungi, mold and, to a large extent, mycotoxins and anaerobic bacteria
low temperatures
Low-temperature drying processes in the range of 45-55 degrees C, DO NOT AFFECT THE MECHANICAL AND BIOLOGICAL SYSTEM OF THE DRIED MATERIAL.
general information
Characteristics of a wood dryer
The complex is based on the principle of using low-temperature infrared radiation (55-60 degrees). This method speeds up the natural drying cycle of the wood. Example: 1 cm dries for 1 year, and in our case - 1 day. Our process is 365 times faster. Our drying technology activates (revives) the capillary system and the internal moisture moves in one direction - the juice flow. The capillary system remains intact. During drying, shrinkage of wood occurs in the same way as in natural conditions - length / width / thickness. Drying Principle - Our system directly affects the moisture inside the product, so the temperature inside the material is higher than outside. Blowing from the top contributes to lowering the temperature. Moisture tends to the cold zone - to the surface. The temperature difference is 3-5 degrees. All energy is directed at heating the molecular water, not at the material. The assumed installed power per 1 m3 is about - 6.0 kW. resistance panels and fans. The device operates from 220/380 V / 50 Hz, which is not harmful to humans. Automatic control. During the drying cycle, all devices use 60-70% of the installed electricity
general information
table of sample parameters
- The infrared mode disinfects and dries, inhibits the growth of fungi and mold.
- Preserves and protects the capillary structure, thickening and sealing it
- There are no internal stresses
- Wood is perfectly processed on machines - (milling and longitudinal and butt cutting)
| Dane: | ||||||
|---|---|---|---|---|---|---|
|
Kind of wood |
Cross-section (mm) |
Volume (m3) |
Input humidity from % |
Output humidity % |
Cycle (day) |
|
|
Pine (woody) |
70x70 |
10 |
45 |
10-12 |
6 |
|
|
Pine (plank) |
20-40 |
10 |
45 |
10-12 |
5 |
|
|
Pine (plank) |
50* |
10 |
45 |
10-12 |
6 |
|
|
Oak (board) |
50* |
10 |
45 |
10-12 |
7 |
|
|
Oak (board) |
30* |
10 |
45 |
10-12 |
6 |
|
|
Beech (board) |
70* |
10 |
45 |
10-12 |
7 |
|
|
Beech (plank) |
50* |
10 |
45 |
10-12 |
7 |
|
|
Round wood |
D -16 |
6 |
40 |
16-18 |
5 |
|
|
Basswood (board) |
30* |
10 |
45 |
10-12 |
5 |
|
|
Alder (board) |
30* |
10 |
45 |
10-12 |
5 |
|
|
Birch (plank) |
50* |
10 |
45 |
10-12 |
6 |
|
QUESTIONS & ANSWERS
WHAT DO CUSTOMERS ASK MOST OFTEN?
One of the features of our technology is low working temperatures. Drying takes place in the range of 45-55*C.
The drying process is natural, as in nature, thanks to which the material is practically perfectly dried without the risk of damage.
Drying a 70mm thick beech board with an input humidity of 43% within 6 days, we reach an output humidity of 11%.
They are very small due to the low installed power of the heating devices and the much shorter drying time.
We present photos of our product
gallery
